Copyright Silhouette School 2016. Powered by Blogger.


Silhouette Print and Cut Tutorial for Beginners

The Print and Cut feature on the Silhouette is perhaps one of the most intimating on the cutting machine.  It's also one of the most amazing and powerful.  While it's understandable to be a little nervous about your first Silhouette Print and Cut project, there's no reason to avoid it since it literally will make your crafting and scrapping life easier!

silhouette print and cut, print and cut silhouette, silhouette cameo print and cut, print and cut silhouette cameo, print and cut files for Silhouette

I promise you once you do one Silhouette cut and print project, you'll feel more comfortable and confident.  Because Printing and Cutting can be intimidating, I'm going to walk you through the Silhouette Cut and Print tutorial one step at a time and break this into four parts. 

1) Setting up your Print and Cut file in Silhouette Studio
2) Registration Marks
3) Printing Your File
4) Cutting & Registration Marks

Setting up Your Silhouette Print and Cut File

First things first: open up Silhouette Studio and pick your design from either the free library or the Silhouette Online Store.  The first project you do I would highly recommend using a design that's specifically designed for print and cut (you can search 'print & cut' in the Silhouette Online Store's search box).  There are several free options that come in the Silhouette Library or you can buy one in the Silhouette Online Store.

NOTE: If you want to make several of the same design, we will duplicate the original after we get it all set up for print and cut. 
Open your design into the Silhouette Studio work area. 

print and cut silhouette, silhouette cameo print and cut, print and cut silhouette cameo, print and cut files for Silhouette, print cut machine

We're actually going to start by going to the Send panel so we can adjust our cut lines.

For a Silhouette Print and Cut you typically only want the edge of the design to cut so you'd pick "Cut Edge." In this case I am making a tag so I need the ribbon hole to be cut out as well. For that reason I have to ungroup the design (right click > Ungroup) and select the ribbon hole circle and the outside edge and click "Cut".

All other cut lines - including any internal text - should remain off or as "No Cut."

silhouette print and cut, print and cut silhouette, silhouette cameo print and cut, print and cut silhouette cameo

Move back to the Design tab and Immediately regroup the design by selecting the entire design > right click > Group.

print and cut silhouette, silhouette cameo print and cut, print and cut silhouette cameo, print and cut files for Silhouette, print cut machine

Now you can resize your design and move it around the Silhouette Design Studio work area to where you want it to print and cut.  If you want to cut more than one you can duplicate the image by selecting it > right click > Duplicate or by using one of the other methods to replicate in Silhouette Studio.

print and cut silhouette, silhouette cameo print and cut, print and cut silhouette cameo, print and cut files for Silhouette, print cut machine


Adding Registration Marks 

Now comes one of the most important parts: setting up your page size and adding registration marks!

Open the Page Set Up Panel.  

Start by changing the material size to Current Printer.

Further down you'll want to make sure to pick the correct size cutting mat based on the machine you are cutting with.

Finally check the boxes to show both the cutting area and the print area.

silhouette print and cut, print and cut silhouette, silhouette cameo print and cut, print and cut silhouette cameo, print and cut files for Silhouette

Next move to the Registration Marks tab and from the Style dropdown at the top pick "Type 1". 

Once you do this three black marks will appear on your work area along with a hashed area.  Be sure none of your designs are touching the any of these areas. If they are move, them slightly making sure all designs and all parts of designs are inside the Cut border and the Print border.

print and cut silhouette, silhouette cameo print and cut, print and cut silhouette cameo, print and cut files for Silhouette, print cut machine

And now we're ready to print...

Printing from Silhouette Studio

Be sure your computer is connected to your regular printer and that you have paper in the paper tray.

From along the top tool bar, click the 'Send to Printer' button and your design will print.   I had mine print on cardstock.  Here's what it looked like once it printed.

Print and cut, Silhouette, Silhouette tutorial, beginners, Silhouette Studio, printer

You can see Silhouette Studio places some markings on the top corners and the bottom left corner.  These are the registration marks and they are what tells the Silhouette where to cut the design. 

That was easy...and now we're ready for the fun part: Cutting!

Cutting with Silhouette Print and Cut Function

Take your printed sheet and place it on the cutting mat so the top edge of the paper is in line with the top edge of the grid on the mat. For this Silhouette print and cut project, I was cutting with my Silhouette Portrait.


Print and cut, Silhouette, Silhouette tutorial, beginners, Silhouette Studio, cutting mat, fishbowl

When your mat is prepared, load it into your cutting machine.

Print and cut, Silhouette, Silhouette tutorial, beginners, Silhouette Studio, loading, Silhouette Portrait

Once the mat is loaded, return to the Send panel in Silhouette Studio.

Change the material type to match the material you are cutting - in this case Cardstock.

You'll also want to double check the Tool. I am cutting with an original Portrait so I have to use the Ratchet Blade, but if you are cutting with a Silhouette CAMEO 3 or Portrait 2 your tool will default to Autoblade.

Finally, click "Send." This will begin the cutting process. 

silhouette print and cut, print and cut silhouette, silhouette cameo print and cut, print and cut silhouette cameo, print and cut files for Silhouette

The blade mechanism will start moving around your paper to detect each registration mark.  It's not actually cutting at this point.

Once all three of the registration marks have been successfully scanned, the cutting will begin.
This is where the magic happens!  So sit back and wait for your printed file to be cut to perfect...
Check this out.  How amazing is that?!

Print and cut, Silhouette, Silhouette tutorial, beginners, Silhouette Studio, Silhouette cutting mat

Print and cut, Silhouette, Silhouette tutorial, beginners, Silhouette Studio, Silhouette Portait


Print and cut, Silhouette, Silhouette tutorial, beginners, Silhouette Studio

Let me see 'em! Share a link to your first Print and Cut project in the comments below or upload a picture to our Facebook wall! 




 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

20 comments

  1. Hi, this bit of kit looks really great! I'm thinking about making a purchase to make my wedding stationary. I have a question, I'd like to make printed tags on quite thick card (too think to go through my printer). I think my best bet is to print onto paper/labels and stick it onto the card and then cut them out. Do you think that the Sillhouette would cut cleanly through both the paper and the card together? Or would the paper get scrunched up?
    Many thanks, your tutorials are great!
    Louise

    ReplyDelete
  2. Just to clarify, by card, I probably mean cardboard (do you call it chipboard in the USA?) it's probably the thickness of two cereal boxes. Having just looked at other tutorials on your site, would the silhouette be able to cut through this at all? Many thanks, Louise

    ReplyDelete
  3. Can this be printed? I tried to subscribe to newsletter, but I was sent to Mail Chimp with missing page message.

    ReplyDelete
  4. I would like to know how to print and cut on vinyl please.

    ReplyDelete
  5. Do you have a tutorial that deals with print and cut color? My colors are way off from my screen? Do you have any suggestions?

    ReplyDelete
  6. Hello
    I am wanting to do a print and cut file. However, I cannot find the 'free' examples you are talking about. I clicked on the left hand side that looks like a book and my library came up saying there are 153 files. There was nothing there. I then went into the store and could not find it there either.

    I am sure I am doing something wrong- please help! Thanks so much

    ReplyDelete
  7. I got my image printed, but I don't see the "print image" screen you have pictured above that takes you through the rest of the steps for print and cut. I have the new Silhouette Cameo. Thank you!

    ReplyDelete
    Replies
    1. Here's the updated version http://www.silhouetteschoolblog.com/2015/02/silhouette-print-and-cut-tutorial.html

      Delete
  8. I used 8 1/2 by 11 and my images got cut off, how do you set the page size?

    ReplyDelete
  9. With the upgrade my registration lines do not look right and silhouette says registration failed. Please help. Thank you

    ReplyDelete
  10. Can a print and cut design be used for just cutting?

    ReplyDelete
  11. Hi, what is the maximum print and cut area that can be used, 12x12 or will it work for anything that can fit on a cutting matt?

    ReplyDelete
  12. Hi I had emailed you about mis aligned print and cut last night but ive since sorted it....I was using registration marks but not the correct ones for my machine! Love the school and if ever i get stuck hubby tells me to log into school :) Thank you I have learnt so much from here

    ReplyDelete
  13. My silhouette did not cut along my tag edges. The shape was made but it cuts into the design. Any thoughts from anyone?

    ReplyDelete
  14. i dont own a printer so how to transfer a file to other computer with cutting marks

    ReplyDelete
  15. Do you have to use the same size mat as the paper? I've tried this several times and I'm not getting it to line up :(

    ReplyDelete
  16. I am having the most frustrating time trying to do this with the new software. Could you possibly update your tutorial to show where everything is in version 4.1? It's driving me nuts that there isn't a separate cut style window!

    ReplyDelete
  17. Omg thank you so much for this tutorial! I was going crazy trying to get my machine to work and all I needed to do was change it to printer size!!

    ReplyDelete
  18. Will a laser printer work or does it have to be inkjet?

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.